
In total we restored 3 different sets of these gates.
These gates were the original ones installed when a walled garden was built in the grounds of a large house in the mid 1800’s.
As you can see they were in a very poor condition. All the same the client wanted to keep as much of them that could be salvaged.

The gates were removed to our workshop and stripped back to the bare frames.

Unfortunately, the cladding could not be re-used. We did all the restoration works on the frame with period reclaimed timbers.

All the ironmongery was sent away for its own restoration. The gate frames were cut back into the restored stone openings. We had to graft on new sections to the frame outsides to get a good fit in the openings as these had changed with time and restoration.

New air-dried Oak cladding was installed and the gates fully re-installed with the restored ironmongery.

Good for another 150 years!
